Alinco DJ-X3 - Manual (Page 27)

27
2
Basic
O
peration
■
Preset Scan
1
Switch to Preset mode by pressing the [V/P/M (MW)] key.
2
Select AM radio, FM radio, or TV by pressing the [BANK(1M/10M)] key.
3
Press the [SCAN(SCRT)] key.
Preset scan starts, and ". (decimal point)" flashes on the display.
Scanning pauses when a signal is received.
■
Memory Scan
This function scans specified banks or all banks in the Memory mode.
There are three types of Memory scan.
Bank scan ·····································Scans a specified bank only.
Bank link scan·······························Scans multiple banks. Up to five banks can
be linked. Link setting is required in
advance. For more information, see "Setting
Bank Link." (P.40)
All-bank scan ·······························Scans banks 0 to 9.
Tip
In any type of scan, banks A (B), P, and J are not scanned.
W
Flashes
POWER
SCAN
SCRT
V/P/M
MW
BANK
1M/10M 2
1
3