Alinco DJ-X3 - Manual (Page 19)

19
2
Basic
O
peration
· PUSH: Mute function is on while holding the [MONI(ST/SK)] key down. When
you release the key, the function is off and received signals and the
beep sound can again be heard.
· HOLD: Mute function is on, and it remains on until you again press the
[MONI(ST/SK)] key.
Tip
Select either the Monitor function or the Mute function.
The preparation for receiving a signal is now finished. Now, try to adjust the
frequency and receive a signal.
The next section explains the three operating modes of the DJ-X3.
Operating Modes
The DJ-X3 has three operating modes; VFO mode, Preset mode, and Memory
mode.
VFO mode ····································VFO mode allows you to change the
frequency by using the dial.
Preset mode·································The frequencies of AM radio, FM radio, and
TV have been already set and you can
choose among them.
Memory mode ······························You can call up and monitor a previously
programmed frequency.
Tip
To program memory, see "Memory Function." (P.22)
B
POWER
SCAN
SCRT
V/P/M
[MONI(ST/SK)] key