Alinco DJ-S45 - Manual (Page 46)

45
10.Specifications
10
10. Specifications
DJ-S45 CQS/CQL
•Specifications may be changed without a preliminary announcement
in connection with technical development.
Frequency Range
Modulation
Ant. Impedance
Supply Voltage
Current Transmit
(DC6.0V)
Receive
Frequency Stability
Dimension
Weight
LPD (VFO) mode
TX;433.06000-434.78000MHz
RX;433.06000-434.78000MHz
F3
50
Ω
3.0-6.0VDC(DC-JACK), 2xAA Batteries, Li-ion pack
LPD (VFO) mode
Approx.0.20A
Approx. 60mA
+5~-5ppm
57(W) x98 (H) x27.9 (D) mm (Projections exclusive)
DJ-S45CQS
Approx. 164g
(2xAA Batteries inclusive)
PMR mode
TX;446.00625-446.09375MHz
RX;446.00625-446.09375MHz
PMR mode
Approx.0.45A
DJ-S45CQL
Approx. 170g
(2xAA Batteries inclusive)
General
Power Output (DC6.0V)
Modulation
Max. Deviation
Spurious Emission
Mic. Impedance
LPD (VFO) mode
Approx. 10mW
Variable Reactance
+/-2.5kHz
250nW or less
Approx. 2k
Ω
PMR mode
Approx. 500mW
Transmitter
System
Intermediate Freq.
Sensitivity
Selectivity
AF Output
Spurious response
FM: Double-conversion super heterodyne
FM: 1st 21.7MHz, 2nd 450kHz
-15dBu or less (12dB SINAD)
FM: -6dB; 6kHz or over, -60dB; 14kHz or less
180mW or over (MAX)
150mW or over (10% Distortion Factor 8
Ω)
2nW or less
Receiver
■