Alinco DJ-S45 - Manual (Page 22)

21
4-7-2 Monitor Function
•While the MONI key is pressed, the squelch opens and noise is heard
from the speaker regardless of the squelch setting. "BUSY" appears
on the display.
•Weak signals under the squelch threshold level can be heard, using
this function.
•Monitoring the selected frequency can be performed even if the tone
squelch is set.
4-8 Transmitting
1. Select the desired frequency or channel.
2. Press and hold the PTT key, speak into
microphone with normal loudness and
tone. The S meter indicates that the unit
is in the transmitting mode. Speak into
the microphone from a distance of
approximately 5cm.
3. Release the PTT key to stop transmitting and to return to the receiving
mode.
Reference : A tone call signal is transmitted by pressing and
holding the PTT key and pressing the MONI key
(There are 5 tone call signals that are selectable in
the Setting mode).
If the PTT key is pressed when the frequency is
outside of the transmitting range, "OFF" appears on
the display. You cannot transmit in this status.
4.Basic Operations
4