Alinco DJ-S45 User Manual
Page 27
26
SCAn-t
Scan (timed/busy channel) switching
ITEM No.
12
12 09
Choose between timed scan (SCAn-t) and busy channel scan (SCAn-b).
Refer to "6-1 Scanning"(page 30) for details.
m**-oF
Scan skip setting
ITEM No.
13
13 10
Memory channel numbers that you want to skip while in Memory
Scan operation. You cannot designate channels to skip if no memory
channels are programmed. This can be set only in the Memory mode.
("---.---" appears in the LPD (VFO) mode and the PMR mode.)
EPo-oF
External terminal control ON/OFF
ITEM No.
14
14 11
Parameter ON outputs 3.0V from the external MIC terminal when the
squelch is on (5mA max).
Lmp-5
Lamp ON/OFF
ITEM No.
15
15 12
Select OFF to cancel illumination, ON to always illuminate, and 5 to
illuminate the display for 5 seconds at each key operation (except PTT).
bAt-1
Battery type switching
ITEM No.
16
16 13
Choose the battery type between AA cells (bAt-1) and optional
Lithium Ion battery (bAt-2) to properly indicate the low-battery icon.
Refer to "2-4 Battery Level Indicator"(page 9) for details of battery type.
DJ-S45 CQ PMR mode
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
DJ-S45 CQ PMR mode
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
DJ-S45 CQ PMR mode
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
DJ-S45 CQ PMR mode
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
DJ-S45 CQ PMR mode
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
5.Parameter Setting Mode
5