Alinco DJ-S45 User Manual
Page 33
32
6.Advanced Operations
6
6-1-3 Memory Scan
Scans only the programmed memory channels.
1. Switch to the Memory mode by pressing
the V/M key.
2. Press and hold the
keys for 1 to 2
seconds to start scanning.
The decimal point blinks during the scan.
The operation is the same as the LPD
(VFO) scan.
3. To stop scanning, press the PTT key, the
F key or the V/M key.
While MONI key is being pressed,
scanning stops temporarily and monitor
function is activated. When the key is
released, scanning restarts.
6-1-4 Skip Channel
Memory channels where a memory skip is
programmed are out of target for scanning in
the memory scanning.
In the memory channel where a memory
skip is programmed, the decimal point
disappears on the display. Refer to "Scan
skip setting"(page 26) for setting procedure.
▲/▼