Alinco DJ-S45 - Manual (Page 20)

19
4-6-2 Selecting a Memory Channel
1. Switch to the Memory mode by pressing
the V/M key. The memory channel No.
appears on the display.
The Memory mode is not activated if
there is no preprogrammed data in the
Memory channels.
By pressing keys, memory No.
increases and decreases by programmed
channels in numerical order.
4-6-3 Clearing a Memory Channel Data
1. Switch to the Memory mode by pressing the V/M key.
2. Press the F key, and then press the V/M
key while the "F" icon appears.
Memory channel No. appears and the
"W" icon blinks on the display.
3. Select a memory channel you wish to clear by pressing the keys.
On a programmed channel, "memory channel No." is displayed steadily
(without blinking).
4. Press the F key again, and then press the
MW key while the "F" icon appears.
The pre-set data is cleared.
▲/▼
▲/▼
Memory mode
4.Basic Operations
4