Alinco DJ-S45 User Manual
Page 32
31
6.Advanced Operations
6
6-1-1 LPD (VFO) Scan
Scans the entire band in the LPD (VFO) mode.
1. Switch to the LPD (VFO) mode by
pressing the V/M key.
2. Press and hold the
keys for 1 to 2
seconds to start scanning.
The decimal point blinks during the scan.
Scanning direction goes upward by
pressing the
key, and downward by
pressing the
key.
3. To stop scanning, press the PTT key, the
F key or the V/M key.
While MONI key is being pressed,
scanning stops temporarily and monitor
function is activated. When the key is
released, scanning restarts.
6-1-2 PMR Scan (
only)
Scans all channels in the PMR mode.
1. Switch to the PMR mode by pressing the
V/M key.
2. The procedures are the same as the LPD
(VFO) scan. Refer to the procedures of
step2 and 3 above.
PMR mode
DJ-S45 CQ
▼
▲
▲/▼