Alinco DJ-S45 - Manual (Page 24)

23
5. Parameter Setting Mode
In the Setting mode, you can set various functions of the .
5-1 Selectable Parameters
Please refer to "5-2 Selecting the Setting Mode" (page 28) for how to
enter to the Parameter Setting mode and "9-1 Resetting" (page 43) for
the initial factory (default) settings.
The ITEM No. increases when the F key is pressed, and it decreases
when MONI key is pressed.
StP-1250 Tuning step setting
ITEM No. 01
01
The tuning steps can be changed (5/6.25/10/12.5/15/20/25/30/50).
This can be set only in the LPD (VFO) mode.
("---.---" appears in the Memory mode.)
SHIFt Shift direction setting
ITEM No. 02
02
Shift the transmitting frequency in relation to the receiving frequency
as per the offset direction. Only + and - icons appear to indicate the
direction. For simplex operation, select OFF status (without +/- icons).
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
DJ-S45 CQ LPD (VFO) mode
DJ-S45 T/E
■
DJ-S45 CQ/T/E
5.Parameter Setting Mode
5
Reference : When activating the Setting mode from the Memory
mode of the , the item No. differs depending
on the mode which you programmed the channel.
•The ITEM No. of the LPD (VFO) mode indicates if
the channel is programmed in the LPD (VFO) mode.
•The ITEM No. of the PMR mode indicates if the
channel is programmed in the PMR mode.
DJ-S45 CQ