2 repeater ( only) – Alinco DJ-S45 User Manual

Page 34

6.Advanced Operations

6-1-5 Tone Scan

This function helps you to find the tone frequency in case CTCSS

system is used.

1. Press and hold the

keys for 1 to 2

seconds in the tone squelch setting mode

(page 36~38).

Scanning starts and the decimal point

blinks.

39 kinds of tone frequencies are scanned

in order.

When the tone frequency matches,

scanning stops and you can hear the

received signal.

Scanning will not resume until the

keys are pressed again.

2. To cancel the tone scan, press the PTT

key, the F key or the V/M key.

6-2 Repeater (

only)

Repeaters (Automatic relay stations) are located on top of buildings or

mountaintops to allow the communication with stations far away.

DJ-S45 T/E

▲/▼

LPD (VFO) mode

PMR mode