Alinco DJ-S45 User Manual

Page 19

4-6 Memory Mode

The Memory mode is used to call up on a previously programmed

frequency. This transceiver has 100 memory channels (0~99CH).

4-6-1 Memory Channel Programming

1. Switch to the LPD (VFO) or PMR mode by pressing the V/M key.

2. Select the desired frequency or channel.

3. Press the F key, and then press the V/M

key while the "F" icon appears.

The memory channel No. and the "W"

icon blinks.

4. Select a memory channel to program by pressing the

keys.

Blinking memory channel No. indicates that the channel is not

programmed yet. Illuminating memory channel No. indicates that

the channel is already programmed.

5. Press the V/W key while the "W" icon

blinks.

The selected frequency or channel is

programmed to the memory channel.

▲/▼

Memory Channel No.

4.Basic Operations

Caution

Re-editing the memory will overwrite the current data.

Reference : You can also program channels from the PMR mode

if you purchased the

. Its procedure is

the same as the LPD (VFO) mode.

DJ-S45 CQ