ACTi I93 - Manual (Page 9)

www.acti.com
Hardware Manual
9
Physical Description
I93, I94, I95, I96
No. Item Description
1 Reset Button The reset button is used to restore the factory default settings
of the camera, including the administrator ’s password.
To reset the camera, do the following:
a. Loosen the four (4) screws using the bundled hex
screwdriver to remove the cover.
b. Press and hold the reset button for at least 5 seconds or
until the Power LED goes off.
2 Power LED The Power LED lights red when the camera is powered up.
3 Ethernet Port The Ethernet port connects to a network using a standard
Ethernet cable.
4 AC 24V Power Input This jack connects to the power adapter and power cord to
supply power to the camera.
5 Digital Input / Output The colored cables connect to digital input or output devices,
such as an alarm trigger, panic button, etc. Digital Input (DI)
and Digital Output (DO) devices are used for applications like
motion detection, event triggering, alarm notifications, etc. See
How to Connect Digital Input / Digital Output Devices on
page 35 for information.