Hardware manual – ACTi I93 User Manual
Page 30
Hardware Manual
3.
Secure the flex conduit fitting onto the junction box hole.
NOTE:
The PMAX-0702 Junction Box is not a bundled accessory. Contact your sales agents to
purchase.
4.
When using the bundled power adapter, do the following:
1.
Slide the voltage switch to set the adapter voltage according to the voltage standard in
your location.
2.
Connect the power cord to the power adapter.
3.
Connect the power connector of the camera to the cable connector of the adapter.
4.
Install a female power socket (not included) inside the junction box to plug the cord and
power up the camera.
a
b
This manual is related to the following products:
- I94 I95 I96 I910 KCM-8211 I96 2 MP Extreme WDR Day & Night HPoE Outdoor Speed Dome PTZ IP Camera with 30x Lens I915 2MP Outdoor PTZ Network Dome Camera with Night Vision & Heater B928 5MP Outdoor PTZ Network Speed Dome Camera with Night Vision B915 3MP Outdoor PTZ Network Speed Dome Camera with Night Vision