Hardware manual – ACTi I93 User Manual
Page 26
Hardware Manual
4.
Insert the sealing rubber and attach it at the end of the flexible conduit.
5.
Attach one (1) supplied rubber ring on the gland body (smooth end).
NOTE:
Make sure the rubber ring is completely aligned on the gap on the gland body.
6.
Attach the gland body to the Ethernet port of the camera.
IMPORTANT!
Make sure the rubber ring is completely aligned and flat on the gland body
to avoid
possible water leakage.
This manual is related to the following products:
- I94 I95 I96 I910 KCM-8211 I96 2 MP Extreme WDR Day & Night HPoE Outdoor Speed Dome PTZ IP Camera with 30x Lens I915 2MP Outdoor PTZ Network Dome Camera with Night Vision & Heater B928 5MP Outdoor PTZ Network Speed Dome Camera with Night Vision B915 3MP Outdoor PTZ Network Speed Dome Camera with Night Vision