How to replace the dome cover – ACTi I93 User Manual
Page 45
Hardware Manual
How to Replace the Dome Cover
The original dome cover that comes with the camera is Vandal Resistant (IK09). The dome cover
can be replaced with a transparent or smoke Vandal Proof (IK10) dome cover available for
purchase.
To replace the dome cover, do the following:
1.
Loosen the four (4) screws using the hex screwdriver included in the camera package.
2.
Carefully lift the cover. Using a screwdriver, remove the screw to detach the cover from the
camera.
3.
Prepare the replacement dome cover. Below is an example of the smoke vandal proof cover.
This manual is related to the following products:
- I94 I95 I96 I910 KCM-8211 I96 2 MP Extreme WDR Day & Night HPoE Outdoor Speed Dome PTZ IP Camera with 30x Lens I915 2MP Outdoor PTZ Network Dome Camera with Night Vision & Heater B928 5MP Outdoor PTZ Network Speed Dome Camera with Night Vision B915 3MP Outdoor PTZ Network Speed Dome Camera with Night Vision