How to connect audio devices, How to connect audio, Devices – ACTi I93 User Manual

Page 41

Hardware Manual

How to Connect Audio Devices

The camera comes with audio input / output jacks to connect a microphone or speaker to the

camera. The audio jacks are covered with a rubber protection.

If using an audio input device, such as a microphone with a built-in amplifier, connect the device

to the

Audio Input

jack (RED) of the camera. If using an audio output device, such as a speaker,

connect the device to the

Audio Output

jack (GREEN) jack of the camera.

If the camera is installed outdoors, be sure o wrap the audio connectors with Waterproof tape

(can be purchased in hardware stores).

DISCLAIMER:

ACTi will not be responsible for damaged cameras due to water leakage caused

by improper waterproofing of cables.

NOTE 1:

Make sure that the connected audio input device has a built-in amplifier. Connecting an

ordinary microphone will dwarf sounds and will result in inaudible recording.

NOTE 2:

If the audio connectors will not be used, leave the rubber caps on to avoid water and

dust from entering the connectors.

Audio Input Jack

Audio Output Jack

Audio Device

This manual is related to the following products: