Telemecanique plc, Available plcs, Communication setting – Hakko MONITOUCH V7 series User Manual
Page 337: Available memory, Telemecanique plc -130, Available plcs -130, Communication setting -130, Available memory -130, Available plcs communication setting
5-130
28. Telemecanique PLC
28. Telemecanique PLC
Available PLCs
Communication Setting
The recommended communication parameter settings of the PLC and the V7 series is as follows:
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
Select PLC Type
PLC
Connection
TSX Micro
TSX Micro
RS-485
[Wiring Diagram 1]
Item
Setting on PLC
V7 Comm. Parameter Setting
Baud rate
9600 bps
9600 bps
Connection
–
Multi-Link (fixed)
Parity
Odd
Odd
Transmission code
Data length
8 (fixed)
8
Stop bit
1
1
Memory
TYPE
Remarks
MW
(memory word)
0
KW
(constant word)
1
M
(bit memory)
2