Shinko plc, Available plcs, Communication setting – Hakko MONITOUCH V7 series User Manual

Page 305: Available memory, Shinko plc -98, Available plcs -98, Communication setting -98, Available memory -98, Available plcs communication setting

5-98

16. SHINKO PLC

16. SHINKO PLC

Available PLCs

Communication Setting

The recommended communication parameter settings of the PLC and the V7 series is as follows:

Available Memory

The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.

Only D register of SELMART is available. No other devices can be used.
Be sure to note the above though the setting on the V-SFT editor is possible.

Select PLC Type

PLC

Unit/Port

Connection

SELMART

SELMART-100 and later

Version O1M2-UCI-6

RS-232C [Wiring Diagram 1]

Item

Setting on PLC

V7 Comm. Parameter Setting

Baud rate

19200 bps

Parity

Even

Transmission code

Data length

7 (ASCII)

Stop bit

Sumcheck

Provided (fixed)

−

Memory

TYPE

Remarks

(data register)