Wavetronix SmartSensor HD (101-0415) - User Guide - Manual (Page 63)

62 CHAPTER 6 • LANES
Verification
To verify that the lanes were configured properly, close the Configuration screen and select
Verification from the Lanes menu.
The Verification screen allows you to monitor lane detection accuracy and to adjust the lane
properties for better detection.
Sidebars
Click and hold the sidebar buttons on either side of the Lane Verification window
to view the following options (see Figure 6.12):
˽ Presence – Displays buttons to the side of each lane that will light up while the vehicle
is being detected.
˽ Volume – Displays the number of events in each lane.
˽ Speed – Shows the average speed of each individual lane.
˽ Classes 1–8 – Show count for each length-based class, which can be created using the
Class Definitions feature. The number of class bins that appear in this window will be
the same number of class bins that were created (see Definitions in Chapter 7).
Figure 6.12 – Lane Verification Sidebars with Four Classes
Vehicle Display
The Vehicle Display button in the Verification window opens a menu that allows
you to view associated speed, length, length-based class or no additional data. To switch
the display, click on the Vehicle Display button and choose which method to display (see
Figure 6.13).
Figure 6.13 – Vehicle Display Window