Wavetronix SmartSensor HD (101-0415) - User Guide - Manual (Page 20)

In this chapter
˽ Connecting Lightning Surge Protection
˽ Wiring to Earth Ground
˽ Installing the Power Plant
˽ Connecting the Power Plant to Your Installation
˽ Wiring Communication
2
Once the sensor is installed, it will need to be wired for power and surge protection. Wa-
vetronix Click products allow you to quickly and easily include power and surge protection
in your sensor application. Please refer to the Click quick-reference guides for more com-
prehensive product instructions.
There are several ways your sensor might be set up:
˽ A two-part installation, with components in two areas: first, a pole by the road holds
your sensor plus a pole-mount box with a surge protector inside. Second, a main traffic
cabinet holds power and communications devices. The cabinet and pole are connected
via a homerun cable that runs underground.
Note
This chapter assumes the box and cabinet are connected by an underground cable
run, but in certain circumstances they might not be.
Connecting Power and Surge
2