Wavecom W-BitView V2.5.00 - Manual (Page 49)

BitView Manual V2.5.00 WAVECOM W-BV Function Library

43
Parameter Value
Augment Zero Bits Calculate CRC with or without augmented (added) zero bits
CRC Bits Appended Are CRC bits appended to the bit stream (Yes or No)
Final XOR Value Final XOR value in hex
Initial Value Initial value in hex
Order Polynomial order (1..32)
Polynomial Polynomial in hex
Reverse Data Bytes Reflect data byte before processing (Yes or No)
Reverse Result Before XOR Reflect final result before XOR (Yes or No)
The calculated CRC value is displayed in the Calculated CRC field. If CRC Bits Appended is set to ‘Yes’,
then the Transmitted CRC field contains the transmitted CRC value in hex format. If there are no
appended CRC bits, then the Transmitted CRC field has no meaning. The transmitted CRC value is also
displayed in inverted format (Transmitted CRC Inverse).
CRC-8
In: Bit stream
Out: Bit stream
Function:
Calculate the standard CRC-8 values of the incoming bit stream.
The calculated CRC value is displayed in the Calculated CRC field. If CRC Bits Appended is set to Yes,
then the Transmitted CRC field contains the transmitted CRC value in hex format. If there are no
appended CRC bits, then the Transmitted CRC field has no meaning. The transmitted CRC value is also
displayed in inverted format (Transmitted CRC Inverse).
CRC-10
In: Bit stream
Out: Bit stream