Wavecom W-BitView V2.5.00 - Manual (Page 37)

BitView Manual V2.5.00 WAVECOM W-BV Function Library

31
Function:
In Bi-Phase-S encoding, a logical ‘0’ is represented by a pair of two bits of opposite values (‘10’ or ‘01’). A
logical ‘1’ is represented by a pair of bits of the same value (‘00’ or ‘11’). The decoding procedure halves
the number of output bits.
DBi-Phase-M
In: Bit stream
Out: Bit stream
Function:
Two bits form a bit period. A bit change at the beginning of a bit period represents a ‘0’, while no bit
change at the beginning of a bit period represents a ‘1’.
DBi-Phase-S
In: Bit stream
Out: Bit stream
Function:
Two bits form a bit period. A bit change at the beginning of a bit period represents a ‘1’, while no bit
change at the beginning of a bit period represents a ‘0’.