Thinklogical HDMI to SDI Converter Manual - Manual (Page 32)

Revision A 32 October 2011
m: 1080sf @ 24
n: 1080sf @ 25
o: 1080sf @ 29.97
p: 1080sf @ 30
1080p50, 1080p59.94, and 1080p60 can only be YCbCr 4:2:2 10 bit. All other resolutions will proceed to
a sub-menu for color space and bit width selection.
Menu after 3GA / 3GB resolution selection:
Output DL/3G Color Space/Bits Menu
Selects the output color space (YCbCr or RGB) and the bit width (10 or 12 bits):
a: YCbCr 4:4:4 10b
b: YCbCr 4:4:4 10b
c: YCbCr 4:4:4 10b
d: RGB 4:4:4 10b
e: RGB 4:4:4 10b
MAIN MENU C: Video Processing Setup
a: Comp. Artifact Reducer
Selects the menu for Component Artifact Reducer (CAR) video processing functions.
SUB-MENU a: Comp. Artifact Reducer
This feature is used to reduce compression artifacts that are caused by video compression
schemes such as MPEG2. Mostly used on YCbCr 4:2:2 interlaced or progressive input video.
a: Comp. Arti. Reducer EN
Enables the Compression Artifact Reducer.
b: Mosq. Noise Reducer EN
Enables the Mosquito (Ringing) Noise Reducer.
c: Block Noise Reducer EN
Enables the Block (8x8) Noise Reducer.
d: Non Std Block Noise Det EN
Enables the Non-Standard Block Detection.
e: Enable All CAR Blocks
Enables All the above (A,B,C,D) Noise Reduction Blocks.
f: Disable All CAR Blocks
Disables All the Noise Reduction Blocks.