Thinklogical Velocitykvm T-4200 Chassis Manual - Manual (Page 9)

®
T-4200 Chassis, Rev. A
9 September 2011
The KM_Download.exe application and instructions are stored in:
http://ftp.thinklogical.com/ftp/visualization/updates/KmDownloadVxxx.zip
(where „Vxxx‟ is the version number).
Firmware Update Preparation:
1. Retrieve the Firmware files/revision numbers and the KM_Download application/instructions
and place them in an accessible directory in your CPU.
2. Install the KmDownload application (in KMDownloadVxxx.zip file) by running setup.exe.
3. Unzip the Firmware.zip file and place the contents in an accessible directory in your CPU.
4. Have a copy of the instructions and latest versions available for comparison after the update is
complete.
FPGA Download Procedure:
Firmware files and revision numbers are stored in the following:
http://ftp.thinklogical.com/ftp/visualization/updates/FPGA.Firmware.zip
The FPGA_Download.exe application & instructions are stored in:
http://ftp.thinklogical.com/ftp/visualization/updates/FPGA_Upgrade.zip
FPGA Update Preparation:
1. Retrieve the Firmware files/revision numbers and the FPGA_Download application
/instructions
and place them in an accessible directory in your CPU.
2. Copy the file FPGA_firmware.zip to a local directory and extract to a desired location.
3. Copy the file FPGA_upgrade.zip to a local directory.
4. Install setup.exe in FPGA_upgrade.zip.
5. Have a copy of the instructions and latest versions available for comparison after the update is
complete.
3. Front Panel Usage
3.1 Initial Power-Up
Once the system is powered up, the initial Transmitter display is shown as follows:
The company name is listed on the first line of the display. The model and software version
(VXX.XX) of the unit is displayed on the second line.
Thinklogical
Velocity Tx
VXX.XX