Thinklogical Velocitykvm T-4200 Chassis Manual - Manual (Page 10)

®
T-4200 Chassis, Rev. A
10 September 2011
By pressing the down arrow the VelocityKVM Extender allows you to enter into the main menu.
The main root menu items are displayed with an *. They are as follows:
Once a * root menu item is displayed, you can then use the left arrow
or right arrow to review
settings or make changes, if allowed.
The VelocityKVM Extender menu functionality is as follows
( some menu options may not be
available on all models):
TRANSMITTER:
Display Modifiable Description
*System
LS Connected NO An indication of the fiber status from the TX to RX.
Tx Ctrl Name TX Only Name entered on TX unit is displayed on RX unit.
Load Defaults YES Loads factory default video configurations.
Store Values YES Store video configurations.
KM Device NO Revision of the Velocity portion that plugs into CPU.
KM Remote Host NO Revision of the Velocity KM Host on the RX unit.
KM Local Host NO Revision of the Velocity KM Host on the TX unit.
TX Control NO Revision of the TX unit laser and front panel control.
RX Control NO Revision of the RX unit laser and front panel control.
FPGA Version NO Revision of the FPGA used for video generation.
Serial Number NO 2 digits each for DDMMYY and 2 or 3 unique digits
Debug Values YES Factory Use.
SFP Loss of Signal NO Indicates loss of SFP signal
Temp in Celsius NO IN=PCB temp (max=70) EX=FPGA temp (max=85)
KMASS Card ID NO
Video Card ID NO
USB 2.0 Card ID NO
*System
*DDC