Thinklogical Velocitykvm T-4200 Chassis Manual - Manual (Page 6)

®
T-4200 Chassis, Rev. A
6 September 2011
1.2 Technical Specifications
Each Thinklogical VelocityKVM system is designed to the following specifications:
Operating Temp
and Humidity
0° to 50°C (32° to 122 °F), 5% to 95% RH, non-condensing
Dimensions
Rack size: EIA 19”
Height: 1.79” (4.5cm) ± .039”; .100cm
Depth: 14.02” (35.6cm)* ± .039”; .100cm
Width: 17.49” (44.5cm) ± .039”; .100cm
Weights
Weight: 11 lbs (4.99kg) each
Shipping Weight: 27 lbs (12.25 kg) Transmitter and Receiver
Supply Voltage 100-240 VAC, 47-63 Hz, Universal AC power supply
Power
Consumption
<40 Watts per unit
Compliance Approvals for US, Canada, and European Union
Warranty 12 months from date of purchase. Extended warranties available.
1.3 HARDWARE
1.3.1 Physical Connections
All physical connections to the product use industry-standard connectors. Non-supplied cables are
commercially available. All connections are found on the rear of the unit.
1.3.2 Desktop or Rack Mount
You may choose to place your chassis on a shelf or desktop (rubber feet included), or rack-mount it
using the supplied mounting brackets (EIA 19” rack mountable).
See FIGURE 1, page 7, Mounting Bracket Removal.
 The front panel should be visible and unobstructed so that the front panel buttons and LCD
display are accessible.
 All connections are made to the rear of the chassis.
 The VelocityKVM Extender chassis does not need to be opened or accessed.
 The sturdy metal case allows units to be stacked as needed (maximum of 4 units per stack,
with a minimum of 2” clearance between stacks for adequate ventilation).