Teo E911 Response System Installation - Manual (Page 65)

Alarms
13-280133 Rev. C Page 65
H H a a r r d d w w a a r r e e A A l l a a r r m m s s
Alarm Text Alarm Description Alarm Clearing
Illegal Flash
Memory
9145 generates this alarm if
the flash memory is
corrupted.
Perform Reset Controller and/or
power cycle. If the alarm persists,
contact Teo Technical Support.
Flash
Write/Erase
Failure
9145 is detecting flash
memory errors.
Perform a Reset Controller and/or
power cycle. If the alarm persists,
contact Teo Technical Support.
RAM Test Failed 9145 is detecting RAM
memory errors.
Perform a Reset Controller and/or
power cycle. If the alarm persists,
contact Teo Technical Support.
FRAMER #1 Test
Failed
9145 cannot communicate
with the first ISDN Framer
IC in the system.
Perform a Reset Controller and/or
power cycle. If the alarm persists,
contact Teo Technical Support.
FRAMER #2 Test
Failed
9145 cannot communicate
with the second ISDN
Framer IC in the system.
Perform a Reset Controller and/or
power cycle. If the alarm persists,
contact Teo Technical Support.
Monitor Port
Not Responding
9145 cannot communicate
with the internal monitor
port circuitry.
Use the Administration program to
verify that the number of monitor
ports installed equals the number of
monitor ports present in the 9145.
or
Perform a Reset Controller and/or
power cycle. If the alarm persists,
contact Teo Technical Support.