Teo E911 Response System Installation - Manual (Page 51)

System Administration
13-280133 Rev. C Page 51
If you select Add Station, the Edit Station window appears.
1. Edit all required entries.
• Station Name – the name of the station user.
• Station Number – the PBX number assigned to the station, normally used to call
the station.
• Callback Number – a number that emergency responders can use to call the
emergency caller, typically the full dialable (DID) station number.
• E911 Calling Number (ANI) – the calling number sent to the 911 operator at the
PSAP.
• Inside Location – the physical location of the station within the building or
campus.
• Directions – instructions to assist emergency personnel in finding the station
location.
• E911 Notify Group – the group of notifyees who will be alerted when an
emergency call originates from this station. Select a Notify Group from the
dropdown list. Notify Groups are defined in the Notification tab.
• Non-E911 Call Mask Group – the alternate Call Mask Group (caller ID number).
Select a Call Mask Group from the dropdown list. Group 0 disables call masking
for the station. This item takes effect only when system-wide call masking is
enabled.