Teac DV-W14R User Manual

Page 43

FAQ

Rackmount DVD/CD Duplicator User’s Manual

FAQ

5. What does the

Target Overflow

message mean?

This message may be displayed when the source master CD disc contains

data/music in excess of the 700MB/80min disc capacity.

These types of discs are often called “Overburn” discs. Attempting to copy an

Overburn disc might generate read errors at the end of the disc, making the

disc unreadable in regular CD readers. Although this type of recording is not

recommended, this unit is capable of duplicating Overburn discs.

Refer to “12 Advanced Setup (Adv Setup)” on page 27 for more information.

Then, execute function “12.2 Overburn” on page 27 to change the setting to

the ON state. Follow the instructions to exit the Advanced Setup first, and

then execute the [1. Copy function]. This time, the unit will again display the
message and prompt you to continue. Press the

(ENT)

button to create an

Overburn copy.

This message may be displayed when a source DVD disc is copy-protected,

such as a purchased/rented DVD movie/game. There is no Duplicator on the

market that can copy these discs, as doing so is a violation of Federal law.

Replace the source DVD disc with a non-copy protected disc.

This message may also be displayed if the Source DVD disc has a capacity

larger than the DVD disc in the target drive. Make sure that both source and

target discs have the same capacity. For example, if the source DVD disc is

an 8.5GB capacity disc, make sure the target DVD disc is also an 8.5GB disc.

6. What media is recommended?

For best results, brand-name media is recommended (for example: Memorex,

Imation, TDK, Verbatim, Fuji-Film, etc.)

7. How do I copy a CD+G (Karaoke) disc?

The

CD+G

feature is set to OFF as a default.

Refer to “12 Advanced Setup (Adv Setup)” on page 27 for more information.

Then execute function “12.11 CD+G” on page 30 to change the setting to the

ON state. Follow the instructions to exit the

Advance Setup

first, and then

execute the [

1.Copy]

function.

8. How do I copy a CD Text disc?

The CD Text feature is set to “OFF” as a default. Refer to “12 Advanced

Setup (Adv Setup)” on page 27.

Then execute function “12.14 CD-Text” on page 30 to change the setting to

the

state. Follow the instructions to exit the

Advance Setup

first, and then

execute the [

1.Copy]

function.