Teac DV-W14R User Manual

Page 21

1x5 Mode: Copying from the Internal Hard Disk Drive

Rackmount DVD/CD Duplicator User’s Manual

11. Press the

buttons to select the partition you wish to copy from,

then press the

(ENT)

button.

The data will be copied from the selected partition when you specify the hard

disk drive as the source and execute the copy function as described in Steps

13 through 16.

12. Press the

(ESC)

button twice to exit to the DVD/CD Duplicator’s main

menu.

Selecting a Source Drive

13. Press the

buttons to select the [

8 Select Source]

function.

The LCD displays the following message:

14. Press the

(ENT)

button, then press the

buttons to select the

DVD Writer source, as shown below.

15. Press the

(ENT)

button.

The LCD displays the following message:

The hard disk drive is now designated as the source drive.

16. Press the

(ESC)

button to go back to the main menu.

Copying Data from the Hard Drive to Target Discs

17. Press the

buttons to switch to function

[1 Copy]

The LCD will display a message similar to the following:

1 Copy. P: A

This message indicates that the data will be copied from the hard disk drive’s

partition “A” (which was selected in Step 11).

8. Select Source

Src: HDD

01 IDE1 Master

HDD Selected!