5 compare 6 prescan 7 disc info 8 select source, 5 compare, 6 prescan – Teac DV-W14R User Manual

Page 24: 7 disc info, 8 select source

5 Compare

Rackmount DVD/CD Duplicator User’s Manual

5 Compare

The

Compare

function compares data on the source and target discs after the copy

process is complete.

6 Prescan

The

Prescan

function is performed on the source drive. This function scans the

disc to determine the maximum data/audio extraction speed.

7 Disc Info

The

Disc Info

function displays detailed information about the source disc,

including sessions, tracks, capacity, etc.

8 Select Source

The

Select Source

function enables you to select a drive (DVD Writer or hard disk

drive) as the source from which to copy.

If you select the DVD Writer as the source, the unit will work as a 1x4 DVD/CD

Duplicator (one source optical drive and four target optical drives).
If you select the internal hard disk drive, the unit will work as a 1x5 DVD/CD

Duplicator (one source hard disk drive and five target optical drives).

Selecting 1x4 Mode (one source and four target drives)

1. Press the

buttons to select the [

8 Select Source]

function.

The LCD displays the following message:

2. Press the

(ENT)

button, then press the

buttons to select the

DVD Writer source, as shown below.

Be sure to select drive

00 IDE0

. (This is the drive in the upper-right corner of

the unit.)

Note: This function works only with data discs.

8. Select Source

Src: Super Multi

00 IDE0 Master