9 image – Teac DV-W14R User Manual

Page 26

9 Image

Rackmount DVD/CD Duplicator User’s Manual

The LCD displays the following message:

9 Image

The

Image

menu consists of seven functions (9.1 through 9.7). The Image menu

includes

Load, Delete Image, Image Info, Compare Image, Select Image, Image

Src Drive

, and

Image Format Info

functions. The data loaded onto the hard disk

drive is called an “image file.”

9.1 Load
The factory-installed hard disk drive was partitioned and formatted at the factory.

An alphabetical letter identifies each partition. Each partition is approximately

5GB in capacity. The number of partitions depends on the capacity of the hard

disk drive. The

Load

function enables you to transfer data from the source DVD

Writer drive to the current partition of the hard disk drive. (Note:

P:A

stands for

partition A.) You can load as many disc images as the number of partitions

available on the hard disk drive.

9.2 Delete Image
Use the

Delete Image

function to delete an image stored in a particular partition.

9.3 Image Info
Use the

Image Info

function to display basic information for an image file stored

in a particular partition.

9.4 Compare Image
Use the

Compare Image

function to compare the contents of a disc in the source

DVD Writer with the image file in the partition.

9.5 Select Image
The internal hard disk drive was partitioned and formatted at the factory. An

alphabetical letter identifies each partition. Each partition is approximately 5GB

in capacity. The number of partitions depends on the capacity of the hard disk

drive. Use the

Select Image

function to select an image file that is stored in a

specific partition on the hard disk drive.

Note:

P: A

means Partition A. To copy from this partition, you must first

load an image (data). Please refer to the section “Basic Operation” on

page 9 in Chapter 2 for more information.

1. COPY

P: A