Teac DV-W14R - Manual (Page 35)

11.20 Quick Compare
Rackmount DVD/CD Duplicator User’s Manual 27
If you have not set any DVD writer to copy using function 11.5, the Auto Close
Tray function will be invalid. If function 11.5 is valid, you can set for the writer’s
tray to close automatically after copying finishes. You can specify tray closure to
occur within 5 to 50 seconds.
11.20 Quick Compare
With the Quick Compare function, you can specify a comparison of the source and
the copied target discs in increments of 1byte through 100MB.
11.21 Audio Burn Speed
Use the Audio Burn Speed function to specify the write speed at which audio CDs
will be recorded.
12 Advanced Setup (Adv Setup)
The Advanced Setup functions enable you to modify the system configuration.
You should make changes only after you become completely familiar with the
functions in this menu.
To enter Advanced Setup mode, press the (ESC) button for two (2) seconds
until you hear a beep.
Then use the down arrow button to scroll through the various Advanced
functions. Press the (ENT) button to execute any of the Advanced functions.
To exit Advanced Setup mode, press the (ESC) button twice, then press the
down arrow button . The [1 Copy] command will appear on the LCD display.
12.1 UnderRun Protect
The UnderRun Protect setting turns Buffer UnderRun Protection on or off. The
default setting is ON .
12.2 Overburn
The Overburn setting turns the Overburn function in the target drive on or off. The
default setting is OFF .
For more information about Overburn discs, see item 5 in the FAQ on page 35.