Teac DV-W14R - Manual (Page 22)

1x5 Mode: Copying from the Internal Hard Disk Drive
14 Rackmount DVD/CD Duplicator User’s Manual
(If you selected partition B, the LCD will display the message:
“ 1 Copy. P: B ,” and so on. )
18. Place a blank DVD±R disc into each of the target drives, then press the
(ENT) button to start copying.
Notes:
With the default setting, after source data has been successfully copied to
the target DVD discs, the DVD/CD Duplicator automatically ejects the
discs.
With the default setting, if the copy operation fails, the failed target DVD
disc remains in the target drive. To remove the failed DVD disc, press the
eject button on the target drive and retrieve the disc. Then press the eject
button again to retract the disc tray. You can change the default settings by
using the [Advanced Setup] menu. (See “12 Advanced Setup (Adv Setup)”
on page 27.)