Making connections, Adjusting the balance – Teac CD-BT1 User Manual
Page 9
8
— TASCAM CD-BT1
TASCAM CD-BT1 —
9
Making connections
Adjusting the balance
Inputs
e has three input sources
the being played
the bass connected to the
BASS
IN
jack
any stereo input connected to the
LINE IN
jack
e first and last of these cannot have
their input levels changed by the
but see below for details of how
to balance the with the input
se the level control of the device
connected to
LINE IN
to adjust the
level of this source remember that
this source cannot be effected by
the s effects
se the s
INPUT
control
to adjust the level of the bass be
fore it is sent to the effect
hen a menu is not selected you
can use the
6
and
n
keys to set
the relative balance of the bass
but not the
LINE IN
source com
pared to the output from the
player is
MIX
value can be set to
between
–5
and
+5
emember that this is only pos
sible when not in menu mode
se the s menu system
to adjust the output level of the
effect
Outputs
ere are two outputs the line and the
headphones ese cannot have their
levels set separately—use the
OUTPUT
control to set the overall output level
��������������
����������������������
�������������
���������������������
�����������������������
���������������
�����������������
���������������
���������������
�������������
����������������
���������������
������������������
������������������
����������������
��������������
������������������������
�������������������
���������5�����b������
�������������������
��������������������
�������������������