First steps with your cd-bt1 – Teac CD-BT1 User Manual
Page 7
6
— TASCAM CD-BT1
TASCAM CD-BT1 —
7
First steps with your CD-BT1
Using an AC adapter
nly use a adapter
not supplied sing another type of
adapter may damage your
lways make sure that the voltage
matches the voltage written on the
adapter
NOTE
Always remove batteries when operating the
unit with an AC adapter. If batteries are ac-
cidentally left in the unit when it is operated
with an AC adapter, always switch off the
unit before changing from AC adapter to
battery power or switching from battery to
AC adapter operation.
Switching on the unit
e has two power switches
se the first
POWER
switch sliding
switch to turn the power to the whole
unit on and off
e second switch
BASS
controls the
power to the
BASS IN
jack and effect
unit f this section is off you cannot
use this jack or use any of the instru
mentrelated menu systems effect and
tuner
lso note the
HOLD
switch that locks
the s controls and keys when
it is in the
ON
position
HOLD
appears in
the display when this switch is on
Auto power-save
f the unit is powered using batteries
for more than minutes in stop mode
or with no disc loaded or opened the
player shuts down display shows
CD OFF
but you can still use the bass
section
estart the player alone by using
the
y/J
key or use the
POWER
switch if both the and bass sections
are turned off