First steps with your cd-bt1, About this manual, Inserting batteries – Teac CD-BT1 User Manual
Page 6
6
— TASCAM CD-BT1
TASCAM CD-BT1 —
7
First steps with your CD-BT1
About this manual
hen we refer to a key or connector
or control on the we write it
like this
PLAY
hen we refer to an item shown on the
display we write it like this
MENU
Inserting batteries
e uses four
batteries not supplied e recom
mend the use of rechargeable i
batteries alkaline batteries may also
be used
lways use batteries of the same
type
lways replace all batteries to
gether
f you are not going to use the
for some time remove
the batteries
lace the batteries following the
+
and
–
markings inside the battery
compartment
aximize battery life by using
the unit in the following tempera
ture range ˚ to ˚ ˚ to
˚ ickelhydride batteries
may exhibit reduced performance
in an environment under ˚
˚ lso if these batteries
are not used for some time after
charging they may also exhibit
reduced performance
e performance of alkaline bat
teries also depends on temperature
and time since manufacture low
temperatures and longer periods
mean shorter battery life regard
less of the battery indicator as
shown on the display ear this
in mind when operating the unit
and use freshly recharged nickel
hydride batteries new alkaline
batteries or use an adapter if
battery life seems inadequate
lways dispose of used batteries
as recommended by your local
authorities
hen the battery level drops the unit
automatically shuts down and must be
restarted with the
POWER
switch after
the batteries have been replaced
ote that the battery indicator on the
display only provides a rough estimate
of remaining battery life and under
some circumstances there may not be
enough power in the batteries to power
the despite the battery power
indication on the display