Teac CD-BT1 - Manual (Page 17)

16
— TASCAM CD-BT1 TASCAM CD-BT1 —
17
EQ setting
e  provides you with an
internal band equalizer with two
memories to help you shape your
instruments sound se this in the
following way
ress the
EQ key to show one of the
 memories A or B or select no 
memory e settings currently stored
in that memory will be recalled
dit the selected memory by pressing
and holding the EQ key if no memory
is selected you cannot make any 
settings e display shows EQ L low
djust the level of this from – to +
using the 6 and fl keys
e last parameter is the mid shaper
displayed as MID  which performs sub
tle operations on the midrange of the
bass instrument in order to emphasize
the bass tones of your playing
xit the  setting mode by pressing
the DISPLAY/ESC key
ress the ENTER key to cycle through
the other four bands and adjust them
in the same way LM low mid M mid
HM highmid and H high e chang
es you make are automatically stored in
the selected  memory
Display Meaning Center
frequency
L Low 80 Hz
LM Low-mid 200 Hz
M Mid 500 Hz
HM High-mid 1.25 kHz
H High 3.15 kHz