beautypg.com

Trademarks, Cautions on installation, Beware of condensation – Teac US-322 User Manual

Page 6: Cleaning the unit, 1 – introduction

background image

6

TASCAM US-322/366

1 – Introduction

Trademarks

TASCAM is a trademark of TEAC Corporation, registered in

the U.S. and other countries.

Microsoft, Windows, Windows XP, Windows Vista, Windows

7, Windows 8 and Windows Media are either registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Apple, Macintosh, Mac OS, Mac OS X and iTunes are

trademarks of Apple Inc.

Cubase is a registered trademark of Steinberg Media

Technologies GmbH. ASIO is a trademark of Steinberg Media

Technologies GmbH.

Mackie and HUI are trademarks of LOUD Technologies Inc.
Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

Cautions on installation

The unit’s nominal operating temperature is between 5° and

35° C (41° – 95° F).

Do not install in the following types of places. Doing so

could degrade the sound quality and/or cause malfunctions.

Places with significant vibrations or that are otherwise

unstable

Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations

Make sure that the unit is mounted in a level position for

correct operation.

Avoid installing this unit on top of any heat-generating

electrical device such as a power amplifier.

Beware of condensation

If the unit is moved from a cold to a warm place, or used after a

sudden temperature change, there is a danger of condensation;

vapor in the air could condense on the internal mechanism,

making correct operation impossible. To prevent this, or if this

occurs, let the unit sit for one or two hours at the new room

temperature before using.

Cleaning the unit

To clean the unit, wipe gently with a soft dry cloth. Do not use

any paint thinner, ethyl alcohol or other chemical agents to

clean the unit as they could damage the surface.