Teac DP-03 - Manual (Page 88)

88
TASCAM DP-03
How to Buttons, etc. to press Description
Insert silence at a point in a track MENU ® TRACK EDIT ® OPEN See "OPEN (insert silence)" on page 51.
Jump to a location mark
LOCATE LIST ® select the mark with
DATA wheel ® F4 (JUMP)
See “Location marks” on page 45.
Jump to the IN and OUT and TO points Press IN, OUT or TO
See "Using IN, OUT and TO points" on
page 46.
Listen to a CD CD ® CD PLAYER
See “Playing back an audio CD” on page
72.
Load a song MENU ® SONG ® LOAD See "Loading a saved song" on page 35.
Make all of an SD card usable by a PC MENU ® CARD ® SD INITIALIZE See "Initializing SD cards" on page 64.
Make an exact copy of (clone) a track MENU ® TRACK EDIT ® CLONE TRACK
See "CLONE track (track duplicatin)" on
page 52.
Metronome settings METRONOME See "Metronome" on page 59.
Mute the playback sound of the track MUTE See "Muting tracks" on page 54
Name a song MENU ® SONG ® NAME EDIT See "Editing names" on page 35.
Normalize the volume of the stereo
master track
MIXDOWN/MASTERINGx2 ® F3
See “Mastering the stereo master track”
on page 56.
Ping-pong (bounce) to other tracks BOUNCE See "Bouncing tracks" on page 43.
Playback a created stereo master track MIXDOWN/MASTER x 2
See “Checking the stereo master track”
on page 55
Protect a song MENU ® SONG ® PROTECT See "Protecting songs" on page 37.
Record a guitar Set the INPUT A switch to GUITAR
See "Selecting the input source" on
page 38.
Redo one operation UNDO/REDO
See "Undoing an operation" on page
41.
Remove a section of a track and replace
it with silence
MENU ® TRACK EDIT ® SILENCE See "SILENCE (part erase)" on page 52.
Remove the USB connection Disconnect the unit from a PC See "Disconnecting" on page 66.
Restore a song from a PC
MENU ® DATA BACKUP ® SONG
RESTORE
See "Restoring songs" on page 67.
Restore data backed up on a CD CD ® CD RESTORE
See “Restoring a song from a CD” on
page 76.
Save a song MENU ® SONG ® SAVE See "Saving a song" on page 36.
Set a location mark Press and hold LOCATE LIST See “Location marks” on page 45.
Set the IN and OUT points Press and hold IN, OUT or TO
See "Using IN, OUT and TO points" on
page 46.
Tune a guitar or wind instrument TUNER See "Tuner" on page 59.
Undo one operation UNDO/REDO
See "Undoing an operation" on page
41.
Un-protect a song MENU ® SONG ® PROTECT See "Protecting songs" on page 37.
Use EQ (equalizer) on a track EQ See "Track EQ (equalizer)" on page 53.
Use EQ (equalizer) on an input signal EQ
See "Using input EQ (equalizer)" on
page 39.
Use equalization on the stereo master
track
MIXDOWN/MASTERINGx2 ® F1
See “Mastering the stereo master track”
on page 56.
Use phantom power PHANTOM
See "Using phantom power" on page
38.
Use the built-in mic
Set the INPUT A/B switch to INTERNAL
MIC A/B
See "Selecting the input source" on
page 38.
Use the metronome METRONOME See "Metronome" on page 59.
Use the USB connection
Connect the unit and a PC with the USB
cable.
See "Connecting with a computer" on
page 65.
User compression on the stereo master
track
MIXDOWN/MASTERINGx2 ® F2
See “Mastering the stereo master track”
on page 56.
18 – Commonly-used Functions