Teac DP-03 - Manual (Page 11)

TASCAM DP-03
11
2 – Quick Start Guides
When the power is ON, do not cut the power to the •
unit by disconnecting the power cord, for example.
Before turning the power ON, minimize the
•
headphones volume and the volume on any monitoring
system connected to this unit.
TIP
If an amplifier or powered speakers are connected to the
LINE OUT jacks, you can monitor using speakers.
Listening to the demo song
The included SD card in the unit contains a demo song.
We will use this demo song to practice listening to and
mixing a recording.
1 Press the HOME button to open the Home Screen.
2 When the Home Screen is open, press the MENU
button to open the
MENU
screen.
3 Use the DATA wheel to select the
SONG
menu item
and press the F4 (¥) button to open the
SONG
screen.
NOTE
When an item is selected, it appears as light characters on
a dark background.
4 Use the DATA wheel to select the
LOAD
item and
press the F4 (¥) button to open the
SONG LOAD
screen, which shows a list of the songs on the card.
5 Use the DATA wheel to select
DEMO_03
and press
the F2 (
EXEC
) button to load the demo song and
return to the
SONG
screen.
6 Press the HOME button to return to the Home
Screen.
7 Press the PLAY (Á) button, and raise the TRACK
1–8 faders, MASTER fader and PHONES LEVEL knob
to listen to the demo song.