Teac Live 9 Lite - Manual (Page 6)

Live 9 Lite Quick Start Guide
6
TASCAM
7. From the “File” menu, select “New Live Set”.
By default, a Live Set with 2 MIDI tracks (Tracks 1 and 2) and 2 audio
tracks (Tracks 3 and 4) is created.
8. Add audio tracks to Tracks 5 and 6.
First, click “4 Audio” so that Track 4 is selected.
Next, select “Insert Audio Track” from the “Create” menu to add the
“5 Audio” track.
Select “Insert Audio Track” again to add the “6 Audio” track.
Tip
To add a MIDI track, select “Insert MIDI Track” from the “Create”
menu.
9. Configure the input port and output port assignments in each
track.
A track has an input port and an output port. The input port is
where signals to be recorded enter and the output port is where
signals are output for listening sounds which are recorded or
reproduced.
From the pull-down menu just under “MIDI From” of the “1 MIDI”
track, select your audio interface (US-2x2 in this case). MIDI
commands input into the MIDI input terminal of the US-2x2 will be
input into the “1 MIDI” track.
Next, from the pull-down menu just under “MIDI To”, select US-2x2.
MIDI commands of the “1 MIDI” track will be output from the MIDI
output terminal of the US-2x2.
Tip
If settings of the input and output ports are not displayed, check
“Input/Output” of the “View” menu to display them.