Teac DR-60DMKII - Manual (Page 18)

18
TASCAM DR-60DMKII
8 Starting the recording
1. Press the record (0) button to begin recording
standby.
The screen shows the recording file name, the
input source, the recording audio file type and
sampling frequency. Please confirm that these
are as desired before starting recording.
2. To start recording, press the record (0) button
again.
When recording starts, the REC indicator
lights continuously, and the display shows the
elapsed recording time and the remaining
recording time.
3. Press the stop (8) [HOME] button to end
recording and create the audio file.
To pause recording, press the record (0)
button. Press the record (0) button or play
(7) button again to restart recording in the
same file.
If you press the stop (8) [HOME] button
after pausing a recorded audio file up to the
moment that you paused recording is created.
Playback
Adjusting the playback volume
Use the PHONES and CAMERA OUT (HIGH)/LINE
OUT volume controls to adjust the levels output
from the PHONES and CAMERA OUT (HIGH)/LINE
OUT jacks.
Playback
When the Home Screen is open and playback
is stopped, press the play (7) button to start
playback.
8 Pausing
When the Home Screen is open and a file is playing
back, press the stop (8) [HOME] button to pause
playback at the current position.
8 Stopping
When the Home Screen is open and a file is playing
back, press the stop (8) [HOME] button to pause
playback, and press the stop (8) [HOME] button to
return to the beginning of the file.
8 Rewinding and fast-forwarding
(search)
When the Home Screen is open and a file is playing
back or stopped, press and hold the . or /
button to rewind or fast-forward and search the
playback file.
8 Changing the playback position
When the Home Screen is open and playback is
stopped or paused, turn the DATA dial to change
the playback position.
Playback will be paused after the position is changed.
Selecting files for playback
(skipping)
When the Home Screen is open, press the . and
/
buttons to select the file for playback.
If you press the . button when the playback
position is located at the middle of a file, it will return
to the beginning of that file. If you press the .
button when located at the beginning of a file, the
playback position will skip to the beginning of the
previous file.
If you press the / button when located at
the beginning of or middle of a file, the playback
position will skip to the beginning of the next file.
Menu structure
You can make various settings with the PLAY
SETTING item on the MENU screen.
PLAY SETTING
AREA Set the file selection area
ALL FILES, FOLDER
REPEAT Set the repeat mode
CONTINUOUS, SINGLE,
1 REPEAT, ALL REPEAT
JUMPBACK Set jump-back playback
OFF, 1–10sec, 20sec, 30sec