Teac DR-60D - Manual (Page 89)

TASCAM DR-60D
89
11 – Using the REMOTE jack
This unit has a REMOTE jack to which you can connect a TASCAM
RC-3F footswitch-type remote control or TASCAM RC-10 wired
remote control (both sold separately) that can be used to operate
the unit.
Footswitch (TASCAM RC-3F)
Footswitch
TASCAM RC-3F
(sold separately)
Setting footswitch operation
Use the REMOTE setting screen to make footswitch settings.
1. Press the MENU button to open the
MENU
screen.
2. Turn the DATA dial to select OTHERS , and press the DATA dial or
/ button to open the
OTHERS
screen.
3. Turn the DATA dial to select REMOTE , and press the DATA dial or
/ button to open the
REMOTE
screen.
4. Turn the DATA dial to select
CONTROLLER
, and press the DATA
dial or / button.
5. Turn the DATA dial to select
RC-3F
. (default value:
RC-3F
)
6. Use the . button or DATA dial to select
MODE
, and press the
DATA dial or / button.
7. Turn the DATA dial to select
MODE
.
Options: PLAY (default value), RECORD1 , RECORD2 , RECORD3 ,
REVIEW
MODE
FOOT SW
L
C R
PLAY REW PLAY/STOP FWD
RECORD1 STOP REC/PAUSE INC
RECORD2 STOP REC/PAUSE MARK
RECORD3 STOP REC/PAUSE SLATE
REVIEW FLASH
PLAY/STOP
(Play while pressed)
FWD
INC: Track incrementing function
MARK: Mark function
FLASH: Jump-back playback
(All other functions are the same as using the buttons on the
unit.)
8. When finished making the setting, press the Stop (8) [HOME]
button to return to the Home Screen.