Teac DR-60D - Manual (Page 53)

TASCAM DR-60D
53
4 – Recording
12. If
REC MODE
is set to
DUAL ST
, you can also set MS mic
decoding.
To use a mid-side mic, turn the DATA dial to select
MS MODE
,
and press the DATA dial or / button.
13. Turn the DATA dial to set the decoding mode when using a
mid-side mic.
Options Explanation
OFF Record in ordinary stereo mode.
REC
Use to decode while recording. Playback is
conducted without decoding.
MONITOR
Record mid-side mic output without decoding
for decoding later. Use this mode to monitor
when recording with a mid-side mic.
Use this also when playing back mid-side files
that were recorded without decoding.
14. When finished making the setting, press the MENU button to
return to the MENU screen. Press the DATA dial or . button
to select the other item.
15. Turn the DATA dial to select INPUT SETTING , and press the
DATA dial or / button to open the
INPUT SETTING
screen.
16. Turn the DATA dial to select
DELAY
, and press the DATA dial or
/ button.
17. Turn the DATA dial to set this value according to the distance of
the mic connected to the channel.
Range: 0ms (default value) to ± 150ms (in 1ms increments)
18. When finished making the setting, press the stop (8) [HOME]
button to return to the Home Screen.
Starting dual recording
Press the record (0) button to start dual recording.
During dual recording, the recording screen appears as follows.
Dual mono recording Dual stereo recording
In the input source display area of the recording screen, the input
levels of the current input source and the dual recording are shown.