Teac DR-60D - Manual (Page 34)

34
TASCAM DR-60D
3 – Preparation
Using USB bus power
Connect the unit to a PC using the attached USB cable as shown in
the illustration.
Computer
USB
Mini-B USB plug
The
USB SELECT
screen appears to choose between USB bus
power for power supply or connection with a PC through the USB
cable when USB cable is connected after the unit is turned on or
when the unit is turned on after connecting the USB cable. Turn the
DATA dial to select
BUS POWER
and press the DATA dial to select
power supply from the USB port. The Home Screen will appear.
NOTE
• Power is supplied from the USB port if the USB cable is connected
to the unit that contains batteries (USB bus power prioritized).
• The AC adaptor also connects using the USB cable, so set it to BUS
POWER in the same way.
CAUTION
• Depending on the USB bus power specifications of the computer,
this unit might not function when connected to the computer by
USB cable. In this case, use a TASCAM PS-P515U AC adaptor (sold
separately) or batteries.
• This unit does not support computer power conservation and
sleep functions. When powering the unit using the USB bus power
of a computer, always turn such functions off.