Mark function, Adding marks manually to a recording, Adding marks automatically to a recording – Teac DR-60D User Manual

Page 59: Moving to a mark position, 4 – recording

TASCAM DR-60D

4 – Recording

Mark function

Adding marks manually to a recording

You can manually add marks to a recording where you want them.
1. Press the DATA dial while recording to add a mark.

Mark number pull-up appears.

NOTE

•

Mark information is stored in the file with numbers between

–

. The maximum number of marks in a file is 99.

•

Marks added to BWF format WAV files by this unit during

recording are stored in the file. These marks can be used when

playing back the file using software or equipment that supports

the BWF format.

Adding marks automatically to a recording

This function allows the unit to add marks automatically using

AUTO

REC

On the

AUTO REC

screen, set the

MODE

item to

MARK

Moving to a mark position

You can move to marks in the currently selected file when stopped

or playing back.
You can use this function to identify points to create shortcuts to the

beginning of songs, for example.
1. Press the . or / button while pressing and holding the

DATA dial during playback or when stopped.

NOTE

You cannot move to a mark in a different file.

This manual is related to the following products: