Teac DR-60D - Manual (Page 56)

56
TASCAM DR-60D
4 – Recording
File names when recording in 4-channel
In 4-channel recording, a set of two files is created—one for the
external mics connected to channels 1 and 2 and one for the
external device or stereo mic connected to channels 3/4.
TASCAM_0002S12.WAV
TASCAM_0002S34.WAV
1 : Set with the WORD item on the
FILE NAME
screen
2 : Recording file base number
3 :
S
is the source file
4 : Assigned channels (
12
is channels 1/2 and
34
is channels 3/4)
Recording automatically (AUTO REC)
This function allows the unit to respond to input sound levels and
start and pause recording, as well as set marks and create new files,
for example.
1. Press the MENU button to open the
MENU
screen.
2. Turn the DATA dial to select
AUTO REC
, and press the DATA dial
or / button to open the
AUTO REC
screen.
3. Turn the DATA dial to select
MODE
and press the DATA dial or
/ button.
4. Turn the DATA dial to set the automatic recording mode.
OFF (default value): Off
MARK: Sets marks automatically during recording
PAUSE: Automatically pauses during recording
TRK INC: Automatically creates new files during recording
5. Press the DATA dial or . button to select the other item.
6. Turn the DATA dial to select
START LEVEL
, and press the DATA
dial or / button.
7. Turn the DATA dial to set the start level, which is the level that
the unit recognizes as an input signal.
Options: –6dB , –12dB (default value), –24dB , –48dB
8. Press the DATA dial or . button to confirm the setting and
return to item selection.
9. Turn the DATA dial to select
END LEVEL
, and press the DATA
dial or / button.