SVSi N2000 Series User Manual
Page 71
Page 71
N2000 Series User Manual
www.svsiav.com
Chapter 4. Decoder Options
Decoder Setup Section
Stream
View/edit the current transmit stream
number.
To better understand this setting, think
of Decoders more like a channel on a
cable box, rather than a traditional AV
Matrix. Each Decoder must have a
unique stream number, just like every
channel must have a unique channel
number (e.g., Food Network and HGTV
cannot both be on channel 201).
Audio Stream
View/edit the current audio receive
stream number.
Audio Follows Video
Enable to force the Audio Stream to
the same as the video stream.
Scaler
Enable to scale outgoing content to a
fixed resolution or to use the Crop/
Pan/Zoom functions.
Output Mode
Select the output resolution of the
video to be transmitted to the video
output device (e.g., LCD) (the Scaler
check box must be enabled for this to
be applicable).
Live/Local
Select live video or locally stored
images for transmission to the video
output device (e.g., LCD). When video
is not available, it automatically goes
into local mode.
When video is not available, the most
recently played local playlist is
displayed.
Mute
Enable to mute output audio.
Lineout Volume
This slider controls the output gain on
the analog audio output. By default, it
controls both the left and right lineout
channels. Click the Set Left/Right link
to control channels individually.
Enable HDMI Audio
ON forces audio on at all times. AUTO
reads the EDID of the connected
device to determine whether or not to
send audio.
Advanced Settings
Refer to
for details on the options available from
this link.
RS232 Settings
for details on the options available from
this link.
Table 4-1. Settings Page: Decoder Setup Section (Continued)
Option
Description
Notes