SVSi N2000 Series User Manual

Page 22

Text mode
Original mode

Page 22

N2000 Series User Manual

www.svsiav.com

Chapter 2. Installation

Step-by-Step Installation Instructions

Note: If the computer does not need Internet access, you can simply enter a unique
169.254.xxx.xxx IP address with a 255.255.0.0 subnet mask. Contact your network
administrator if you are unsure of how to configure the existing network. SVSi units will not
self-assign in the 169.254.0.xxx range.

Note: If the computer has a statically-assigned IP address, click the Advanced button. Then
click Add to enter a unique 169.254.xxx.xxx address with a subnet of 255.255.0.0.

4. Scroll down in the list to the

Internet Protocol Version 4
(TCP/IPv4) option. Highlight it and
click the Properties button.

5. Enable the Use the

following IP address option,
and enter the static IP
address provided to you by
your network administrator.